Product Overview
This flange-mounted static torque sensor has a square socket interface and is intended for applications that do not require continuous rotation. Rated capacities range from 2 to 5,000 N·m, with an output sensitivity of 1.0 mV/V. Optional conditioned outputs are available through an external transmitter module.
Main Features
-
Flange mounting with a square socket interface
-
IP65 ingress protection rating
-
Repeatability of ≤±0.05% FS
-
Safe overload capacity of 150% FS
Product Application
Typical Applications
| Static and reaction torque measurement |
Torque measurement in test fixtures |
Fastener tightening torque testing |
| Valve and actuator torque testing |
Square-drive tool torque testing (1/4"–1 1/2") |
|
Technical Data
| Measurement |
| Measurement Type |
Static and reaction torque |
| Rated Capacity |
2–5,000 N·m |
| Rotation |
For applications without continuous rotation |
| Output Sensitivity |
1.0 mV/V |
| Non-Linearity |
≤±0.1% FS |
| Power & Output |
| Recommended Excitation |
5–12 V DC |
| Maximum Excitation |
18 V DC |
| Sensor Output |
1.0 mV/V |
| Optional External Transmitter Outputs |
4–20 mA / 0–5 V / 0–10 V / PROFIBUS / Modbus / CANopen / RS485, depending on module configuration |
| Additional Ordering Options |
0…±5 V / 0…±10 V; conditioned outputs require an external transmitter module |
| Torque Polarity |
Clockwise positive / counter-clockwise negative, or clockwise negative / counter-clockwise positive |
| Input Resistance |
380 ±10 Ω |
| Output Resistance |
350 ±3 Ω |
| Insulation Resistance |
≥2,000 MΩ |
| Mechanical & Connection |
| Mounting |
Flange mounting |
| Torque Interface |
Square socket |
| Square Socket Sizes |
1/4" / 3/8" / 1/2" / 3/4" / 1" / 1 1/2" |
| Material |
Stainless steel |
| Electrical Connection |
Binder 581 series, 6-pin connector |
| Performance |
| Hysteresis |
≤±0.05% FS |
| Repeatability |
≤±0.05% FS |
| Creep (30 min) |
±0.05% FS |
| Zero Output |
<±1% FS |
| Temperature Effect on Output |
±0.05% FS / 10 °C |
| Temperature Effect on Zero |
±0.05% FS / 10 °C |
| Safe Overload |
150% FS |
| Ultimate Overload |
200% FS |
| Environmental Conditions |
| Operating Temperature |
−30 to +80 °C |
| Ingress Protection |
IP65 |
| Dimensions — 2 / 5 / 12 N·m |
| A / B / C (mm) |
64 / 10 / 8 |
| ØD / ØE / ØM (mm) |
70 / 50 / 5.5 |
| G / H / P (mm) |
3 / 3 / 36 |
| ØN / ØQ / ØR H7 (mm) |
22 / 39 / 20 |
| Square Socket Size (F) / Hole Pattern |
1/4" / A |
| Dimensions — 25 / 63 N·m |
| A / B / C (mm) |
64 / 10 / 11.5 |
| ØD / ØE / ØM (mm) |
70 / 50 / 5.5 |
| G / H / P (mm) |
3 / 3 / 36 |
| ØN / ØQ / ØR H7 (mm) |
22 / 39 / 20 |
| Square Socket Size (F) / Hole Pattern |
3/8" / A |
| Dimensions — 100 / 160 / 200 N·m |
| A / B / C (mm) |
75 / 12 / 16 |
| ØD / ØE / ØM (mm) |
80 / 60 / 6.6 |
| G / H / P (mm) |
15 / 3 / 41 |
| ØN / ØQ / ØR H7 (mm) |
29.8 / 45 / 20 |
| Square Socket Size (F) / Hole Pattern |
1/2" / A |
| Dimensions — 500 N·m |
| A / B / C (mm) |
88 / 15 / 24 |
| ØD / ØE / ØM (mm) |
100 / 80 / 9 |
| G / H / P (mm) |
3 / 3 / 45 |
| ØN / ØQ / ØR H7 (mm) |
44 / 59 / 20 |
| Square Socket Size (F) / Hole Pattern |
3/4" / B |
| Dimensions — 1,000 N·m |
| A / B / C (mm) |
94 / 15 / 28.6 |
| ØD / ØE / ØM (mm) |
120 / 100 / 11 |
| G / H / P (mm) |
5 / 3 / 45 |
| ØN / ØQ / ØR H7 (mm) |
54 / 69 / 20 |
| Square Socket Size (F) / Hole Pattern |
1" / C |
| Dimensions — 2,000 N·m |
| A / B / C (mm) |
124.5 / 20 / 41.5 |
| ØD / ØE / ØM (mm) |
145 / 120 / 13 |
| G / H / P (mm) |
5 / 3 / 55 |
| ØN / ØQ / ØR H7 (mm) |
76 / 90 / 20 |
| Square Socket Size (F) / Hole Pattern |
1 1/2" / C |
| Dimensions — 5,000 N·m |
| A / B / C (mm) |
129.5 / 25 / 41.5 |
| ØD / ØE / ØM (mm) |
200 / 170 / 17 |
| G / H / P (mm) |
5 / 4 / 57 |
| ØN / ØQ / ØR H7 (mm) |
95 / 125 / 105 |
| Square Socket Size (F) / Hole Pattern |
1 1/2" / C |
