Skip to results list

Strain Gauges

( 1 item )

Filter

  • SX-FSINC Series

    The SensorsX SX-FSINC series comprises uniaxial metal foil strain gauges for surface strain measurement on structural and mechanical components. When bonded to a test surface, each gauge converts strain along its sensing axis into a change in electrical resistance. The gauges use constantan sensing grids on modified phenolic backings and are available with nominal resistances of 120, 350, and 1,000 Ω. They are suitable for static and dynamic strain measurement. The ordering information specifies standard supply without lead wires; contact us if pre-attached lead wires are required.

    • Type: Uniaxial foil resistance strain gauge.
    • Nominal resistance: 120 / 350 / 1,000 Ω; tolerance is model-dependent.
    • Gauge factor: 2.0 ±1%.
    • Strain limit: 2%.
    • Grid length: 1–100 mm; model-dependent.
    • Grid / base: Constantan / modified phenolic.
    • Temperature / elastic-modulus self-compensation code: 11.
    • Creep compensation code: N0.
    • Recommended excitation: 120 Ω, 2–4 V; 350 Ω, 5–10 V.
    • Current when bonded to metal: 20 mA maximum; 10–15 mA recommended for zero stability.
    • Mounting: Bonded to the test surface along the strain direction.
    • Standard supply: Without lead wires; pre-attached lead wires on request.
    • Solder-free assembly: Gauge, insulated enameled wire, bondable terminal and customizable extension cable.
    • Operating temperature: −30 to +80 °C.