Home / Products / Motion & Inertial Sensors / Inertial Measurement Unit (IMU)
Skip to results list

Inertial Measurement Unit (IMU)

( 3 items )

Filter

  • SX-MIEHC Series

    The SensorsX SX-MIEHC series is a MEMS inertial measurement unit (IMU) integrating a three-axis gyroscope and a three-axis accelerometer. It provides calibrated angular rate and acceleration data through an SPI interface, with temperature compensation, sensor misalignment compensation, and nonlinearity correction. The series is intended for integration into navigation, attitude measurement, robotics, and platform stabilization systems. Four performance versions—B, C, D, and E—are available, with optional three-axis magnetometers and digital barometers for Versions B/C/D, while Version E measures gyroscope and accelerometer data only. The output data rate is 2,000 Hz for Versions B/C/D and 1,000 Hz for Version E.

    • Standard sensors: Three-axis gyroscope + three-axis accelerometer.
    • Gyroscope / accelerometer range: ±450 °/s / ±20 g on X, Y and Z axes.
    • Performance versions: B / C / D / E.
    • Gyro bias instability, B / C / D / E: 2 / 0.8 / 0.5 / 0.3 °/h.
    • Accelerometer bias instability, B / C / D / E: 50 / 20 / 20 / 15 μg.
    • Gyro scale factor nonlinearity: 300 ppm; accelerometer: B/C 250 ppm, D/E 150 ppm.
    • Gyro / accelerometer bandwidth: B 400 Hz; C/D/E 268 Hz.
    • Optional magnetometer: ±8 Gauss; B/C/D only.
    • Optional barometer: 300–1,100 mbar; B/C/D only.
    • Version E: No magnetometer or barometer.
    • SPI output: B/C/D 2,000 Hz; E 1,000 Hz.
    • Power: 3.3 V DC; <1 W.
    • SPI settings: Mode 3; SCLK <10 MHz; MSB first; 16-bit transfers.
    • Connector: 24-pin, 1.00 mm pitch; mating SAMTEC CLM-112-02 or equivalent.
    • Working / storage temperature: −40 to +85 °C / −55 to +105 °C.
    • Vibration / shock: 6.06 g (20–2,000 Hz) / 1,500 g for 0.5 ms.
  • SX-MIXHC Series

    The SensorsX SX-MIXHC series is a compact 6-axis MEMS inertial measurement unit integrating a three-axis gyroscope and a three-axis accelerometer. It outputs three-axis angular rate, acceleration, and roll, pitch, and yaw data through an RS-422 interface. The gyroscope and accelerometer measurement ranges are ±450 °/s and ±20 g, respectively. The unit supports periodic transmission and external triggering, with a 3.3 V LVTTL falling-edge trigger input. Temperature compensation covers −40 to +85 °C, and typical applications include industrial automation, robotics, vehicle motion sensing, and platform stabilization.

    • Measurement: Three-axis angular rate, acceleration, and roll / pitch / yaw.
    • Gyroscope / accelerometer range: ±450 °/s / ±20 g.
    • Roll / yaw range: ±180°; pitch range: ±90°.
    • Gyro bias instability: 0.5 °/h; accelerometer: 15 μg.
    • Gyro / accelerometer random walk: 0.03 °/√hr / 0.025 m/s/√hr.
    • Scale factor nonlinearity: Gyro 300 ppm; accelerometer 250 ppm.
    • Bandwidth: 268 Hz.
    • Attitude accuracy: Dynamic 0.5°; static 0.1°.
    • Interface / output frequency: RS-422 / 200–1,000 Hz.
    • Trigger: LVTTL 3.3 V, falling edge; timed transmission also supported.
    • Power: 5 V DC; 1 W.
    • Working / storage temperature: −40 to +85 °C / −55 to +105 °C.
    • Socket / mating plug: J30J-15ZKNP2-J / J30J-15ZKL-300MM.
  • SX-MIXNC Series

    The SensorsX SX-MIXNC series is a compact 6-axis MEMS IMU for angular rate, acceleration and roll, pitch and yaw measurement. It combines a ±400 °/s gyroscope and ±6 g accelerometer with temperature, misalignment and nonlinearity compensation. Standard RS-232 output runs at 200 Hz; RS-422, RS-485 and CAN are available on request. The IP67 unit operates from 5–30 V DC.

    • Measurement: Three-axis angular rate, acceleration and roll / pitch / yaw.
    • Gyroscope / accelerometer range: ±400 °/s / ±6 g.
    • Roll / heading range: 180° / 180°; pitch range: 90°.
    • Gyro / accelerometer bias instability: 4 °/h / 30 µg.
    • Gyro / accelerometer random walk: 0.5 °/√hr / 0.07 m/s/√hr.
    • Nonlinearity: 200 ppm; nonlinearity accuracy: 0.1% FS for both sensors.
    • Gyro / accelerometer bandwidth: 40–116 Hz / 40–240 Hz.
    • Attitude dynamic accuracy: 0.5°; resolution: 0.01°.
    • Interface / output rate: RS-232 / 200 Hz; RS-422, RS-485 and CAN optional.
    • Power: 5–30 V DC; 0.3 W.
    • Working / storage temperature: −40 to +85 °C / −55 to +105 °C.
    • Protection / size / weight: IP67 / 36 × 35 × 18 mm (body) / 100 g.
    • Connection: 4-wire cable; Ø6.0 ±0.1 mm.