Product Overview
The SX-FENB Series electromagnetic flowmeter consists of a flow tube and a converter. Based on Faraday’s law of electromagnetic induction, it measures the volumetric flow rate of electrically conductive liquids with conductivity ≥5 μS/cm. The series is suitable for water, wastewater, corrosive liquids, acids and alkalis, mud, mineral slurries, and paper pulp. Typical applications include oil and gas, chemical processing, metallurgy, pulp and paper, food processing, municipal water supply, water conservancy, and river or canal flow measurement
Typical Measurements
- Volumetric flow of conductive liquids (conductivity ≥ 5 μS/cm)
- Corrosive liquids including strong acids and alkalis
- Slurries, mineral slurry, and paper pulp
- Bidirectional flow measurement (forward and reverse)
- Municipal water supply and wastewater treatment
Main Features
-
High Accuracy —— ±0.5 % FS; repeatability 0.25 %
-
Wide Flow Velocity Range —— 0.3 – 12 m/s; extended range 0.1 – 15 m/s (0.98 – 49.2 ft/s)
-
Bidirectional Measurement —— Measures both forward and reverse flow
-
Multiple Output Signals —— Pulse, 4–20 mA, HART, Modbus
- Corrosion Resistant Liners —— Rubber (Neoprene), PTFE; F46 & PU available (ordering options)
- Multiple Electrode Materials —— 316L stainless steel, Hastelloy B/C, Tantalum, Titanium
- Integral & Remote Converter —— One-piece or split-type converter available
- Optional Explosion Protection —— Explosion protection options available
- Flexible Power Supply —— 220 VAC or 24 VDC selectable
-
High Ingress Protection —— IP65 or IP68 per IEC 60529
Product Application
|
Oil & Gas
|
Power Generation
|
Food & Beverage
|
|
Chemical Processing
|
Water & Wastewater
|
Pharmaceutical
|
|
Metallurgy & Smelting
|
Pulp & Paper
|
Municipal Water Supply
|
Technical Data
| Process Connection | |
| Connection Type | Flanged / Wafer (Clamp) / Insertion |
| Flange Standard | EN 1092 / ASME B16.5 |
| Flange Face | Raised Face (RF), available on request |
| Nominal Diameter | DN10–DN2000 |
| Rated Pressure | 0.6 / 1.0 / 2.5 / 4.0 MPa |
| Installation | Flanged or Wafer (Clamp) type |
| Electrode | |
| Electrode Type | Standard |
| Electrode Count | Three or more |
| Electrode Materials | 316L Stainless Steel / Hastelloy B / Hastelloy C / Tantalum / Titanium |
| Liner | |
| Liner Materials | Neoprene Rubber / PTFE / Polyurethane (PU) / F46 (FEP) / PFA |
| Neoprene Rubber | For tap water, industrial water and seawater; <60°C |
| Polyurethane (PU) | For paper pulp, mineral slurry and slurries; <60°C |
| PTFE | For strongly corrosive acid/alkali/salt liquids; <160°C |
| F46 (FEP) | For corrosive acid/alkali/salt liquids; <120°C |
| PFA | For corrosive acid/alkali/salt liquids; <180°C |
| Flange & Housing | |
| Flange / Housing Materials | 304 Stainless Steel / Carbon Steel / 316L Stainless Steel |
| Grounding Components | |
| Grounding Electrode | DN50 and above |
| 316L Stainless Steel Grounding Ring | DN40 and below |
| Optional Grounding Electrode | DN50 and below, non-316L stainless steel material |
| Converter | |
| Converter Form | Integral (One-piece) / Remote (Split) |
| Output & Communication | |
| Standard Output | Pulse (Frequency) |
| Analog Output | 4–20 mA |
| Digital Communication | HART |
| Additional Option | Modbus |
| Protection | |
| Ingress Protection | IP65 / IP68, IEC 60529 |
| Explosion Protection | Optional |
| Standard Version | Without explosion protection |
| Explosion-Protected Version | Available as option |
| Power Supply | |
| AC Power | 220 VAC ±20%, 50 Hz |
| DC Power | 24 VDC |
| Electrical Connection | |
| Cable Entry | 2 × M20×1.5 Female |
Certifications & Compliance
Related Products
Ready to upgrade your sensing infrastructure?
You can directly input your requirements and the AI will automatically match the most suitable model.
